i. Adjust the governor in accordance with
para. 7-8.
j. (Delete)
Section II. HYDRAULIC SUMP AND FILTER (CLASS 1, PRECISE SETS ONLY)
13-10. General.
a. The hydraulic sump is mounted on the left side
of the engine, on Class 1 precise generator sets.
The sump acts as a reservoir for the hydraulic oil
pump, used to supply hydraulic power to the hydrau-
lic throttle actuator.
b. The hydraulic oil filter is mounted on the
sump and provides predection against contaminant in
the hydraulic oil pressure system.
13-11. Removal, Cleaning and Inspection.
Refer to the Operator and Organizational Maintenance
Manual.
13-12. Repairs.
a. Repair threaded holes by retapping.
b. Repair cracks by welding.
c. Replace all defective parts.
d. Replace a defective filter.
13-13. Equipment Test.
If the electro-hydraulic actuator has been renewed
or repaired, refer to Chapter 16, Section II and
conduct the following tests.
a. Frequency and voltage regulation, stability,
and transient response test, short term. (para
16-15. )
b. Frequency adjustment range test.
(para
16-16.)
13-6 Change 1
