Notes:
1.
ALL SOLDERED CONNECTIONS SHALL BE IN ACCORDANCE WITH
MIL-STD-454,
REQUIREMENT
5.
2.
INSTALL STRAPS, FIND NO. 4, AT 3.0 MAXIMUM INTERVALS
AND AT EACH CABLE BREAK-OUT.
WIRE MARKING TO BE IN ACCORDANCE WITH MIL-W-5088
3.
EXCEPT THAT LENGHT BETWEEN GROUPS OF NUMBERS SHALL
NOT EXCEED 6 INCHES.
4.
CRIMPED TERMINAL SHALL MEET THE PERFORMANCE REQUIREMENTS
OF MIL-T-7928.
5.
INSTALL END SEAL PLUGS, FIND NO. 2, IN UNUSED HOLES
OF CONNECTOR, FIND NO. 1.
6.
INTERPRET DRAWING PER MIL-STD-l00.
7.
REFERENCES:
a)
FOR WIRING DIAGRAM SEE DRAWING 72-2826.
b)
FOR SCHEMATIC DIAGRAM SEE DRAWING 72-2827.
ME 5-6115-465-34/8-11
Figure 8-11.
Electric Winterization Kit Wiring Harness, Drawing No. 72-2855
