TM 5-6115-465-34
SAVFAC P-8-625-34
TO 35C2-3-446-2
TM 06868B/06895D34
Figure 3-17. Main Fuel Tank (Metal), Removal and Installation
(2) Flush interior of day tank with an approved
3-16. FUEL TRANSFER PUMPS.
solvent.
Refer to the Operator's and Organizational Maintenance
(3) lnspect day tank assembly for cracked or
Manual for fuel transfer pumps maintenance procedures.
broken welds, dents, and damaged threads.
FUEL STRAINER AND FILTER ASSEMBLY.
3-17.
(4) Check interior of tank for scale formation and
Refer to the Operator's and Organizational Maintenance
hardened sediment deposits.
Manual for fuel strainer and filter assembly maintenance
procedures.
(5) Test for leaks as follows:
3-18.
DAY TANK ASSEMBLY.
(a) Plug all openings except one.
Refer to the Operator and
a. Removal.
(b) Install a firing and attach a compressed
Organizational Maintenance Manual for day tank assembly
air line to the unplugged opening.
removal instructions.
(c) Submerge day tank in a container of
b. Cleaning, Inspection, and Repair.
water and apply 5 psig air pressure.
(1) Clean exterior surfaces with dry cleaning
(d) Check for bubble formations which will
solvent (Federal Specification P-D-680) and dry with
indicate leakage.
filtered compressed air.
Change 9
3-22.1/(3-22.2 blank)
