TM 5-6115-465-12
TO 35C2-3-446-1
NAVFAC P-8-625-12
TM 06858B/06859D-12
Electric Winterization Kit Control Assembly Indicator Lamp
Fuse Replacement
(c) Replace indicator light assembly if
(b) Tag and disconnect electrical con-
damaged beyond simple repair.
nectors from control box.
(3) Installation. Install indicator light as-
(c) Remove screws (3) and carefully
sembly in reverse order of removal procedures.
pull panel assembly (4) away from control box.
b . Circuit Breaker.
(d) Tag and disconnect electrical leads
to indicator light assembly.
(1) Removal.
(e) Unscrew lens (5) and remove lamp
(a) Gain access to interior of control
(6).
box (paragraph (a) through (c) above.
(f) Remove nut (7) and tooth lockwasher
(b) Tag and disconnect electrical leads
(9) to remove nut (10) and base (8).
to circuit breaker.
(g) Do Not remove nut from base.
(c) Remove nut (11, figure 4-7) and
tooth lockwasher (12) to remove circuit breaker (13).
(2) Cleaning and Inspection.
(a) Clean indicator light assembly with
filtered compressed air and a soft bristle brush or
(2) Cleaning and Inspection.
wipe with a clean, lint-free cloth lightly moistened
with an approved solvent.
(a) Clean circuit breaker with filtered
compressed air and electrician's brush or wipe with
(b) Visually inspect indicator light as-
a clean, lint-free cloth lightly moistened with an
sembly for cracks, corrosion, stripped or damaged
approved solvent.
threads and evidence of shorting or other damage.
