T.O. 35C2-3-442-2
P-9-TM-457-35
TM 5-6115-457-34
TM-07464A-35
Legend to figure 6-47:
1.
17.
Cover
Reverse power relay (K15)
18.
Screw assembly (2)
2.
Screw assembly (4)
3.
19.
Screw assembly (4)
Governor resistor assembly
20.
4.
Wire
Nut (4)
21.
Nut (4)
5.
Terminal lug (4)
22.
6.
Screw (2)
Harness assembly
23.
7.
Screw assembly (2)
Nut assembly (2)
8.
24.
Nut assembly (2)
Terminal board TB2
25.
9.
Terminal board
Screw (6)
10.
26.
Nut (6)
Screw assembly (4)
11.
27.
Resistor (R1, R2, R3)
Over voltage relay (K2)
28.
Mount
12.
Screw assembly (2)
29.
Screw assembly (6)
13.
Overload relay (K14)
14.
30.
Bracket
Screw assembly (4)
31.
15.
Chassis assembly
Short circuit relay (K13)
16.
Screw assembly (4)
6-182. CLEANING. Clean all components
paper and touch up painted surfaces. Re-
with a lint-free cloth moistened in an ap-
stencil panel markings as necessary.
proved cleaning solvent and dry thoroughly.
6-185. REASSEMBLY. Refer to figures
INSPECTION AND TEST.
6-183.
6-41 and 6-47 and reassemble the tactical
a. Harness.
relay box in reverse order of index num-
bers assigned. Pay particular attention
1. Inspect harness wiring for de-
to the following.
fective insulation and continuity.
a. Install wire harness (6) in chassis
2. Inspect harness connectors for
assembly (31) and secure in position with
damaged threads; bent, loose or missing
eight screw assemblies (2 and 3) and nuts
pins and for shorts.
(4 and 5).
b. Inspect resistors R23, R24 and R25
for rated resistance; 7.5 1 percent,
b. Assemble governor resistor assem-
10 watts.
bly (19) and terminal board (9) to bracket
c. Inspect terminal board (TB2 for
(30), then install the assembly in chassis
cracks and missing hardware.
assembly (31).
6-184. REPAIR.
c. Install overvoltage relay (11),
a. Repair or fabricate tactical relay
overload relay (13), short circuit relay (15),
box wire harness in accordance with figure
and reverse power relay (17) in position
6-48.
using four each screw assemblies.
b. Straighten dented or distorted sheet
metal parts using proper tools. Blend in
d. Refer to figures 6-48 and 1-19 and
repaired area with a suitable abrasive
connect wire harness leads to componentry.
6-143
Change 3
