T O 35C2-3-442-2
P-8-627-34
TM-07464A-35 TM 5-6115-457-34
d. Place top rail (18) between right
h. Fasten spring studs (9) into left angle
angle (20) and left angle (21) Secure with
21. Secure closing spring (8) to spring studs
nut (15), lock washer (16) and screw (17).
(9).
e. Repeat procedure d. above for the
i. Attach block (4) to control bar (11)
bottom rail (19).
utilizing nut (5) lock washer (6) and screw
(7). Insert rod (3) through block (4); place
f.
Place bushings (13) into control bar
spring (2) over rod (3) and secure with
(12). Slide control bar (11) over vane pivot
cotter pin (1).
a r m . Secure with retaining ring (10); one
on the top vane and every fifth vane there-
after.
4-33. INSTALLATION. Refer to Operator
and Organizational maintenance manual and
g. Repeat procedure f. above for
install shutter.
control bar (11).
4-8
Change 8