T.O. 35C2-3-442-2
P-9-TM-457-35
TM 506115-457-34
TM-07464A-35
Table 2-3. Troubleshooting (Continued)
PROBABLE CAUSE
MALFUNCTION
CORRECTIVE ACTION
DUMMY LOAD KIT
a. Defective load meas-
a. Test and repair if defec-
73. Dummy load kit will
not apply load when
uring unit.
tive (paragraph 6-248).
automatic load switch
b. Test and repair if defec-
is in the ON position,
b. Defective load dumping
but does apply load
relay (K5).
tive (paragraph 13-11).
when switch is in
BYPASS RESET
c. Defective wiring
c. Rebuild harness (par a-
harness.
position.
graph 13-7 or 13-26).
a. Defective load dumping
74. Dummy load kit trips
a. Test and repair if defec-
relay (K5).
off the line below
tive (paragraph 13-11).
automatic removal
point.
b. Defective load meas-
b. Test and repair if defec-
uring unit.
tive (paragraph 6-248).
a. Defective load dumping
75. Dummy load kit does
a. Test and repair if defec-
not disconnect at
relay (K5).
tive (paragraph 13-11).
automatic removal
point.
b. Defective load meas-
b. Test and repair if defec-
uring unit.
tive (paragraph 6-248).
76. Dummy load set does
a. Defective transformer
a. Test and replace if defec-
not apply load when
(T1).
tive (paragraph 13-24).
automatic load switch
is in either position.
b. Defective bridge recti-
b. Test and replace if defec-
fier assembly CR1,
tive (paragraph 13-24).
CR2, CR3, or CR4.
c. Defective wiring
c. Rebuild harness (para-
harness.
graph 13-7 or 13-26).
2-56
