T.O. 35C2-3-442-2
P-9-TM-457-35
TM 5-6115-457-34
TM-07464A-35
Table 1-1. Repair and Replacement Standards (continued)
MANUFACTURER' S
MAXIMUM
DIMENSIONS AND
ALLOWABLE
TOLERANCES
WEAR AND
COMPONENT
IN INCHES
DESIRED CLEARANCE
CLEARANCE
MIN
MAX
MIN
MAX
Starting Motor Assembly:
(continued)
*
Cover bore for pin
0. 2820
0.2840
Commutator end head
0.6320
bronze bearing I.D.
0.6270
0.6260
Armature shaft diameter
0.6200
at commutator end
0.6250
0.6230
*
Fit of shaft in bearing
0. 0040L
0. 0010L
Commutator end head
*
0.7540
0.7550
bronze bearing O.D.
*
Fit of bearing in end head
0. 0040T
0. 0020T
Intermediate housing
bronze bearing I.D.
0.8760
0.8740
0.8780
Armature shaft diameter 0. 8700
0.8720
0.8670
(Between spline and
armature).
Fit of armature shaft in
bronze bearing
0. 0020L
0. 0060L
0. 0080L
Runout of shaft bearing
with end bearing
0. 0050TIR
*
intermediate housing bore 0.9990
1.0000
Intermediate housing
*
sleeve bearing O.D.
1.0030
1.0040
*
0. 0030T
0. 0050T
Fit of bearing in housing
Pinion housing bearing
0.7470
0.7480
I.D.
0.7520
* - L - T - See footnotes at end of table.
1-31