TM 9-6115-668-13
4.40 FUEL PREFILTER ASSEMBLY MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
General Mechanic’s Tool Kit
Reference
(item 2, appendix B)
Generator Set 150 kW shut
Automotive Fuel and Electrical System Repair, Tool Kit
down,
(item 3, appendix B)
paragraph 2.5.2
Materials/Parts
Sealing rings
Plastic bag
(item 21, appendix E)
Rubber bands
(item 22, appendix E)
WARNING
Before removing, completely drain Fuel Prefilter Assembly and/or
Two Step Fuel Filter Assembly and all fuel lines connected to them.
Make sure there are no open flames in the vicinity while draining
fuel.
Wait until Generator Set 150 kW has cooled down before perform-
ing this task.
NOTE
If fuel lines are not to be reinstalled immediately, bag the ends with
plastic bags and secure with rubber bands.
REMOVAL
1.
Remove unit hood assembly (1, figure 4-42) as instructed in paragraph 4.14.
CAUTION
Place a container under heavy duty fuel filter set and priming pump
to catch fuel as it emerges.
After disconnecting, plug fuel lines and tie up.
4 - 9 4
