TM 9-6115-668-13
4.31 SUBCURRENT FILTER CARTRIDGE MAINTENANCE.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit
(item 2, appendix B
Automotive Fuel and Electrical System Repair, Tool Kit
(item 3, appendix B
Materials/Parts
Oil Filter Cartridge
2 Sealing rings
REMOVAL
1.
Open flap (2, figure 4-36).
Equipment Conditions
Reference
Generator Set 150 kW shut
down, paragraph 2.5.2
CAUTION
Place a drain pan under the oil filter and dispose of waste oil In accor-
dance with local ordnances.
2.
Pump out oil with scavenge pump (3) (paragraph 2.3.2.3).
3.
Unscrew drain plug (8) from subcurrent filter assembly (4), remove sealing ring (9), and drain oil
into pan.
4.
Remove screw (15) and washer (14).
5.
Remove cover (13), spring (12), and sealing ring (11), from filter housing (10). Discard sealing ring
(11).
NOTE
Use a cloth to wipe excess oil from the area.
6.
Remove oil filter cartridge (7) from filter housing (10) and discard.
INSTALLATION
1.
Install drain plug (8) and new sealing ring (9).
2.
Install oil filter cartridge (7) in filter housing (10).
3.
Install cover (13), spring (12), and new sealing ring (11), on filter housing (10).
4.
Install screw (15), washer (14), and tighten.
5.
Fill with proper oil (paragraph 2.3.2.3).
6. Close flap (2).
4 - 7 6