4.29 AIR FILTER CARTRIDGE MAINTENANCE

TM-9-6115-668-13 5Kw 28VDC Auxiliary Power Unit (APU) MEP 952B Manual
Page Navigation
176

TM 9-6115-668-13 4.29 AIR FILTER CARTRIDGE MAINTENANCE. This task covers: a. Removal b. Service c. Installation INITIAL SETUP Tools Equipment Conditions General Mechanic’s Tool Kit (item 2, appendix B) Automotive Fuel and Electrical System Repair, Tool Kit (item 3, appendix B) Reference Generator Set 150 kW shut down, paragraph 2.5.2 Materials/Parts Lubricant (item 6, appendix E) Light-duty detergent, commercial (item 7, appendix E) REMOVAL 1. Open flap (2, figure 4-35) on unit hood assembly (1). 2. Swing clamping clip (6) on air filter housing in direction of arrow, and remove dust collector (4) with cover from air fitter housing (9) of air filter assembly (3). 3. Remove self-locking nut (5) from threaded rod (7) and pull air filter cartridge (6) out of air filter hous- ing (9). SERVICE NOTE Do not damage the end of the air filter cartridge when cleaning it. 1. To dislodge dust, hold air filter cartridge (6) vertically and tap the end several times against your hand or a flat, soft surface. 2. Clean air filter cartridge (6) by swishing back and forth in lukewarm water with a commercial light- duty detergent; rinse in clean water, shake out excess water, and allow to dry thoroughly. 3. Clean air filter dust collector (refer to paragraph 3.4). 4 - 7 2

Privacy Statement
Press Release
Contact