TM 9-6115-668-13
Section II. SERVICE UPON RECEIPT OF EQUIPMENT
4.4 SERVICE UPON RECEIPT OF MATERIEL.
4.4.1 Storage and Transport in Orginal Packaging.
The Generator Set 150 kW is packed in a wooden container (figure 4-1). The container is covered at the
top by rainwater protection film (1). The packing list is located below the plate (2). The container is la-
beled with the necessary logistical identifiers (5).
4.4.1.1 Transport.
The container Is designed for transportation In a horizontal position
only.
a.
When transporting with a forklift, insert forks into sockets (6).
b.
When transporting with a crane, attach lifting cables as indicated (3).
Do not stand In the operating area of the crane or forklift. Do not
walk under the suspended load.
Move the container slowly so that it remains In the horizontal posi-
tion.
4.4.1.2 Storage.
The container can be stored in the original packaging for up to two years. The unit is packaged in airtight ma-
terials meeting MIL standards. The packaging can be checked al regular intervals using the moisture indicator
(8), as follows:
a. Open protective grill (7).
b.
The indicator must be blue in color. If the indicator is entirely or partly pink, proceed as indicated for
30 %, 40 %, and 50 % relative humidity.
c. Close protective grill (7).
4 - 6
