Operator Preventive Maintenance Checks and Services for AN/MJQ-40, PU-803, and PU-804 - continued

Table 2-2. Operator Preventive Maintenenance Checks and Services for AN/MJQ-40, PU-803, and PU-804

Operator Preventive Maintenance Checks and Services for AN/MJQ-40, PU-803, and PU-804 - continued - TM-9-6115-662-13P_48

TM-9-6115-662-13P Power Unit Diesel Engine Driven 1 Ton Trailer Mounted 5 Kw 60 Hz PU-797 Manual
Page Navigation
18

TM 9-6115-662-13&P Item No. 2 Table 2-2. Operator Preventive Maintenance Checks and Services for AN/MJQ-40, PU-803, and PU-804 - continued Location Interval Item to Check/Service Procedure Before TRAILER - continued HANDBRAKE - continued b. Check adjustment of handbrake lever (1). Lever is properly adjusted when it is difficult to move beyond two- thirds of the way to the applied position. If out of adjustment, see step d. With trailer hooked to towing vehicle, set handbrake lever (1). Move trailer slightly to see if handbrakes hold wheels. If not, proceed to step d. Adjust handbrake as follows. Release handbrake lever (1). Turn adjustment knob (2) clockwise to tighten or counterclockwise to loosen. If unable to adjust, or if adjustment has been used up, refer to Unit Level Maintenance. Check adjustment (Refer to step b). Repeat steps 1 and 2 as required. Repeat step c. Not Fully Mission Capable if: 2-10

Privacy Statement
Press Release
Contact