Figure 5-5. Power/Load Cable Removal.

Section III. MAINTENANCE PROCEDURES - TM-9-6115-660-13P_159

Figure -6. Removing Generator Set Mounting Hardware.

TM-9-6115-660-13P Power Plant Diesel Engine Driven 1-Ton Trailer Mounted (With Racks) 3Kw 60 Hz AN/MJQ-42 Manual
Page Navigation
133

TM 9-6115-660-13&P Figure 5-5. Power/Load Cable Removal. 3. Remove self-locking nuts (11), flat washers (9), screws (8), and power cable clamps (10). NOTE Hardware holding generator sets on trailers differs between configurations. When removing generator sets, refer to figure 5-6 to determine hardware used. 4. Remove self-locking or plain nuts (1, figure 5-6), flat washers (2), lock washers (4), and cap screws (3). Change 2 5-9

Privacy Statement
Press Release
Contact