TM 9-6115-604-34
NAVFAC P-8-633-34
Figure 2-7. Removal of Conduit Box Cover Assembly
CAUTION
Take care when lifting generator, as there is enough slack In generator cables and wiring to
remove generator without disconnecting cables and wiring, providing the generator is not
lifted and moved beyond limits stated In paragraph 2-15b(9).
(9)
Lift generator approximately 0. 500 inches (12.7mm) or until generator feet dear generator mounting pads,
and move in rearward direction 6 inches (152.4 mm) and lower to generator mounting pads.
WARNING
Use of slings, chains, or lifting hoists not rated for the weight of the engine assembly may
result Injury to personnel and failing damage to equipment. Lifting gear must be rated for
15,000 pounds (680O kg), minimum.
(10)
See Figure 2-5 and Figure 2-6. Rig the engine assembly for lifting. There are four lifting brackets
mounted to the cylinder block between the cylinder head assemblies. Use locking lifting hooks on the
brackets. Actuate the hoist enough to take the slack out of the lifting chassis, but do not lift the engine at
this time.
2-31
