TM 96115-60424P
NAVFAC P-633-24P
(2) Navy stockage objectives are contained in
e. (ALL) Description. Indicates the Federal item
Consolidated Shipboard Allowance List as furnished
name and any additional descriptions of the item re-
separately from this publication by the Ship Parts Control
quired. The abbreviation "w/e" when used as part of the
Center.
nomenclature, indicates that the National Stock Number
(3) Marine Corps stockage information is contained in
includes all armament, equipment, accessories and repair
columns 3a and 3b of the tabular listing of this publication.
parts issued with the item. A part number or other
(4) Army stockage is demand based in accordance
reference number is followed by the applicable five digit
with AR 710-2. Repair parts listed in this publication
Federal Supply Code for manufacturer in parentheses. If
represent those authorized for use at indi-cated
two reference numbers and Federal Supply Codes for
maintenance levels and will be requisitioned on an as-
manufacturer are listed, the first listing refers to the
required basis until stockage is justified in accordance with
Department of Defense Drawing Number and the second
AR 710-2.
listing refers to the actual part manufacturer. Items that
are included in kits and sets are listed below the name of
5. HOW TO LOCATE REPAIR PARTS.
the kit or set with the quantity of each item in the kit or set
a. (ALL) When National Stock Number or reference
indicated in the quantity incorporated in unit column.
number is unknown:
(1) Using the table of contents, determine the
f. (ALL) Unit of Measure (U/M). Indicates the
functional group: i.e., batteries and related parts, exhaust
standard of the basic quantity of the listed item as used in
and breather pipes, within which the repair part belongs.
performing the actual maintenance function. This
measure is expressed by a two-character alphabetical
This is necessary since illustrations are prepared for
abbreviation (e.g., ea. in, pr, etc.). When the unit of
functional groups, and listings are divided into the same
measure differs from the unit of issue, the lowest unit of
groups.
issue that will satisfy the required units of measure will be
requisitioned .
(2) Find the illustration covering the functional group
to which the repair part belongs.
g. (ALL) Quantity Incorporated in Unit. Indicates the
quantity of the item used in the assembly group. A "V"
(3) Identify the repair part on the illustration and note
appearing in this column in lieu of a quantity indicates that
the illustration figure and item number of the repair part.
a definite quantity cannot be indicated (e.g., shims,
spacers, etc.).
(4) Using the Repair Parts Listing, find the figure and
item number noted on the illustration.
h. (MC) Quantity Per Equipment. Indicates the
consolidated quantity of the maintenance part used on an
b. (ALL) When national stock number or reference
end item upon the part's first appearance in this
number is known:
publication.
(1) Using the Index of National Stock Numbers and
Reference Numbers, find the pertinent national stock
4. SPECIAL INFORMATION.
number or reference number. This index is in ascending
NON sequence followed by a list of reference numbers in
a. (ALL) There are no usable on codes in this
alphanumeric sequence, cross-referenced to the illustration
publication.
figure number and item number.
b. Army organizational maintenance personnel will
(2) After finding the figure and item number, locate the
extract the items which they require from Section II, 3rd or
figure and item number in the repair parts list.
4th position of column 2 of the direct and general support
RPSTL. Parts which are manufactured or assembled at a
6. (F) USE OF THE REFERENCE DESIGNATOR INDEX
higher level than that authorized to install the part are
SECTION. This Section (Section V) is used when the
indicated by the use of higher level code in the source
reference designator is known or identified by other
column.
technical manuals supporting this equipment. The refer-
ence number is given in this Section. If description or
c. Stockage Information.
location is desired, note the figure and item number. Turn to
Section II to the noted figure and item number. The location
(1) Air Force stockage information is con-tained in
of the part and description is given in this listing.
Initial Supply Support Lists issued separately from this
publication by Sacramento Air Logistics Center in
7. ABBREVIATIONS. All abbreviations in this manual
accordance with ARM 67-1, part 1, chapter 12
conform to MIL-STD-12C.
5
