ARMY TM 9-6115-604-12
NAVY NAVFAC P-8-633-12
Figure 4-36. Lightning Arresters E101. E102. and E103
(3)
If necessary, replace lightning arrester mount angles and related parts as follows:
(a)
Remove lightning arrester mount angles (8 and 9) by removing hexagon head screws (5), lock
washers (6), and hexagonal nuts (7).
(b)
Remove lightning arrester bracket (10) by removing hexagon head screws (5), lock washers (6),
and hexagonal nuts (7).
d.
Installation. See figure 4-36.
CAUTION
When installing lightning arresters , all mounting feet must be flush before
tightening bolts . The line terminal must not be used to lift lightning arrester .
Lightning arrester exhaust ports must be directed away from unprotected
equipment.
(1 )
If previously removed, install lightning arrester mount angles and related parts as follows:
(a)
Install lightning arrester bracket ( 10) using hexagon head screws (5), lock washers (6), and
hexagonal nuts (7).
(b)
Install lightning arrester mount angles (8 and 9) to lightning arrester mount bracket (10) using
hexagon head screws (5), lock washers (6), and hexagonal nuts (7).
4-99
