UNIT, DIRECT SUPPORT
AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
1. SCOPE. This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and
diagnostic equipment (TMDE); and other special support equipment required for performance of unit, direct
support, and general support maintenance of the Generator Set, Diesel Engine Driven, Tactical Skid Mounted. It
authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools as indicated by the
source, maintenance and recoverability (SMR) codes.
2. GENERAL. In addition to this section, Introduction, this Repair Parts and Special Tools List is divided into the
a. Section Il. Repair Parts List.
of spares and repair parts authorized
by this RPSTL for use
performance of maintenance. The list also includes parts which must be removed for replacement of the authorized
parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each
group listed in ascending figure and item number sequence. Bulk materials are listed in item name sequence.
Repair parts kits are listed separately in their own functional group within Section Il. Repair parts for repairable
special tools are also listed in this section. Items listed are shown on the associated illustration(s)/figure(s).
b. Section III. Special Tools List. A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON
CODE column) for the performance of maintenance.
c. Section IV. Cross-references Indexes.
A list, in National Item Identification Number (NIIN) sequence,
National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part
numbers appearing in the listings. National stock numbers and part numbers are cross referenced to each
illustration figure and item number appearance. The figure and item number index lists figure and item number in
alphanumeric sequence and cross references NSN, CAGEC and part number.
3. EXPLANATION OF COLUMNS (SECTIONS II AND Ill).
a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b. SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code
containing supply/requisitioning information, maintenance category authorization criteria, and disposition
instruction, as shown in the following breakout:
1 st two
How you get an item
Who can do
Who can install
replace or use the
on the item