ARMY TM 9-6115-464-34
AIR FORCE TO 35C2-3-445-2
NAVY NAVFAC P-8-624-34
NOTES:
ALL SOLDERED CONNECTIONS SHALL BE IN ACCORDANCE
WITH MIL-STD-454, REQUIREMENT 5.
AFTER SOLDERING, INSTALL INSULATION SLEEVING,
FIND NO. 9, .5 LONG, OVER EACH CONTACT OF
1.
2.
3.
4.
5.
6.
7.
CONNECTOR FIND NO. 2 AND 3.
INSTALL STRAPS, FIND NO. 7 AT3.0 MAX
INTERVALS AND AT EACH CABLE BREAK-OUT.
WIRE MARKING TO BE IN ACCORDANCE WITH
MIL–W-5088 EXCEPT THAT LENGTH BETWEEN
GROUPS OF NUMBERS SHALL NOT EXCEED
6 INCHES.
CRIMPED TERMINALS SHALL MEET THE PERFORMANCE
REQUIREMENTS OF MIL–T-7928.
INTERPRET DRAWING PER MlL-STD-100.
REFERENCES
a) FOR WIRING DIAGRAM, SEE DRAWING 72-2205.
b) FOR SCHEMATIC DIAGRAM, SEE DRAWING 72-2200 AND
72–2269.
Figure 3-129. 400Hz Precise Relay Assembly Wiring Harness, Drawing No. 72–2260 (Sheet 1 of 2)
3-269
