ARMY TM 9-6115-454-34
AIR FORCE 35C2-3-445-2
NAVY NAVFAC P-8-624-34
(1)
(2)
(3)
(4)
(5)
(6)
(7)
If removed, install mounting brackets (17, figure 3–108) flat washers (16), screw and washer
assemblies (15).
Install cross-current compensation transformer (14), Iockwashers (13), screws (12), and nuts (11).
Install instrumentation transformer (10), flat washers (9) screw and washer assemblies (8).
If removed, install mounting bracket (7), flat washers (6) screw and washer assemblies (5).
Install current boot transformer (4), screws (3), Iockwashers (2) and nuts (1).
Route generator leads through transformer windows (noting polarity) as shown in figure 3-107; then
connect the wires and remove tags.
Connect electrical leads to transfer winding terminals.
Figure 3-109. Current Transformer Test Point
3-234
