ARMY TM 9-6115-464-34
AIR FORCE TO 35C2-3-445-2
NAVY NAVFAC P-8-624-34
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Scrape gasket remains from oil pan and cylinder block mating surfaces.
Inspect and replace oil level gauge in accordance with instructions provided in the Operator and Unit
Maintenance Manual.
Inspect oil pan for cracks, dents, broken welds and leaks.
Check all threads for crossing, stripping and peening.
Repair cracks and broken welds in oil pan by welding.
Repair minor thread damage with a thread chaser.
Replace any parts damaged beyond repair.
c. Installation. Using new gaskets and seals, apply sealant (such as MILSpecA46102A) to dry gasket.
(1) Refer to paragraph 3-38 and install oil pump assembly. Install new seals (6, figure 3-30) new
gaskets (5), oil pan (4), Iockwashers (3) and screws (2).
(2) Install elbow (7) onto oil pan.
(3) Install oil level gauge (1).
(4) If winterization kits were removed, refer to Operator and Unit Maintenance Manual for installation
procedures.
Figure 3-30. Oil Pan Assembly
3-76
