(ALL) Unit of Measure (U/M). Indicates the standard of the basic quantity of the listed item as used
in performing the actual maintenance function. This measure is expressed by a two-character alphabetical
abbreviation (e.g., ea, in, pr, etc.). When the unit of measure differs from the unit of issue, the lowest unit of
issue that will satisfy the required units of measure will be requisitioned.
g. (ALL) Quantity Incorporated in Unit, (Column 7). Indicates the quantity of the item used in the
assembly group. A V appearing in this column in lieu of a quantity indicates that a definite quantity cannot be
indicated (e.g., shims, spacers, etc.).
h. (MC) Quantity per Equipment, (Column 8). Indicates the consolidated quantity of a maintenance
part used on an end item upon the parts first appearance in this publication.
4. Special Information.
Usable on codes are shown in the description column. Uncoded items are applicable to all models
and/or serial number range. Identification of the usable on codes of this publication are:
MEP-004A (Serial Nos. KZOOO1 thru Z01226)
MEP-113A (Serial No. RZ60001 and subs)
b. Army organizational maintenance personnel will extract the items which they require from Section II,
3rd or 4th position of column 2 of the direct and general support RPSTL. Parts which are manufactured or
assembled at a higher level than that authorized to install the part are indicated by the use of higher level code
in the source column.
(1) Air Force Stockage information is contained in Initial Supply Support Lists issued separately
from this publication by Sacramento Air Logistics Center in accordance with AFM 67-1. part 1, Chapter 12.
(2) Navy stockage objectives are contained in Consolidated Shipboard Allowance List as furnished
separately from this publication by the Ship Parts Control Center.
(3) Marine Corps Stockage information is contained in columns 3a and 3b of the tabular listing of
(4) Army stockage is demand based in accordance with AR 710-2. Repair parts listed in this
publication represent those authorized for use at indicated maintenance levels and will be requisitioned on an
as required basis until stockage is justified in accordance with AR 710-2.
5. How to Locate Repair Parts.
When National Stock Number or Reference Number is unknown: