ARMY TM 9-6115-464-12
AIR FORCE TO 35C2-3-445-1
NAVY NAVFAC P-8-624-12
NOTES:
1.
2.
3.
4.
5
6.
7.
ALL SOLDERED CONNECTIONS SHALL BE IN ACCORDANCE WITH MIL-
STD-454, REQUIREMENT 5.
INSTALL STRAP, FIND NO. 4, AT A 3.00 MAXIMUM INTERVALS AND AT EACH
CABLE BREAK-OUT,
WIRE MARKING TO BE IN ACCORDANCE WITH MIL-W-5088 EXCEPT THAT
LENGTH BETWEEN GROUPS OF NUMBERS SHALL NOT EXCEED 6 INCHES.
CRIMPED TERMINAL SHALL MEET THE PERFORMANCE REQUIREMENTS OF
MIL-T-7928.
INSTALL END SEAL PLUGS, FIND NO. 2, IN UNUSED HOLES OF CONNECTOR,
FIND NO. 1.
INTERPRET DRAWING PER MIL-STD-100.
REFERENCES:
A) FOR WIRING DIAGRAM SEE DRAWING 72-2826.
B) FOR SCHEMATIC DIAGRAM SEE DRAWING 72-2827
Figure 5-8. Electric Winterization Kit Wiring Harness, Dwg. No. 72-2855
5-32
