ARMY TM 9-6115-464-12
AIR FORCE TO 35C2-3-445-1
NAVY NAVFAC P-8-624-12
(2) Cleaning and Inspection.
(a) Clean frequency transducer with filtered compressed air or wipe with a clean, lint-free cloth
lightly moistened with an approved solvent.
(b) Visually inspect frequency transducer for dents, cracks, corrosion, and other damage.
(3) Installation.
(a) Install frequency transducer (24, Figure 4-38, sheet 1 of 3) onto panel.
(b) Install screws (23) and self-locking nuts (22).
(c) Reconnect electrical leads to frequency transducer.
h. Kilowatt Meter.
(1) Removal.
(a) Tag and disconnect electrical leads to kilowatt meter.
(b) Remove self-locking nuts (25, Figure 4-38, sheet 1 of 3) and screws (26).
(c) Remove kilowatt meter (27) from panel.
(2) Cleaning and Inspection.
(a) Clean kilowatt meter with filtered compressed air or wipe with a dean, lint-free cloth Iightly moist-
ened with an approved solvent.
(b) Visually inspect kilowatt meter for corrosion, cracked casing, cracked or broken glass, stripped
or damaged threads, and evidence of shorting or other damage.
(3) Installation.
(a) Install kilowatt meter (27, Figure 4-38, sheet 1 of 3) onto panel.
(b) Install screws (26), and self-locking nuts (25).
(c) Reconnect electrical leads to kilowatt meter.
i.
Thermal Watt Converter.
(1) Removal.
(a) Tag and disconnect electrical leads to thermal watt converter.
(b) Remove self-locking nuts (28, Figure 4-38, sheet 1 of 3), screws (29) and washers (30) to remove
thermal watt converter (31 ) from control cubicle assembly.
(2) Cleaning and Inspection.
(a) Clean thermal watt converter with filtered compressed air or wipe with a clean, lint-free cloth
lightly moistened with an approved solvent.
(b) Visually inspect thermal watt converter for dents, cracks, corrosion, stripped or otherwise dam-
aged threads, and evidence of shorting or other damage.
(3) Installation.
(a) Install thermal watt converter (31, Figure 4-38, sheet 1 of 3), washers (30), screws (29), and
self-locking nuts (28) onto control cubicle assembly.
4-90
(b) Reconnect electrical leads to thermal watt converter.
