TM 5-6115-593-12 TO 35C2-3-463-1 APPENDIX B BASIC ISSUE ITEM LIST AND ITEMS TROOP INSTALLED OR AUTHORIZED LIST Section I.  INTRODUCTION B-1. SCOPE. This appendix lists integral components  of  and  basic  issue  items  for  the  500  KW 50/60 HZ DOD generator set to help you inventory items required for safe and efficient operation. B-2. GENERAL.    This  component  of  end  item  list  is divided into the following sections: a.     Section   II.      Integral   Components   of   the   End Item.  These items, when assembled, comprise the  500  KW  50/60  HZ  DOD  generator  set  and must accompany it whenever it is transferred or turned in.  The illustrations will help you identify these items. b.     Section III.  Basic Issue Items.  These items are furnished with 500 KW 50/60 HZ DOD generator set   and   must   accompany   the   generator   set when  transferred  between  accountable  officers. This   manual   is   your   authority   to   requisition replacement BII. c.     Section  IV.    Troop  Installed  or  Authorized  List. These  items  are  authorized  on  and  as  required basis.        This    manual    is    your    authority    to requisition troop installed or authorized items. B-3. EXPLANATION OF COLUMNS. (1)   Illustration.        This    column    is    divided    as follows: (a)   Figure   number.      Indicates   the   figure number  of  the  illustration  on  which  the item is shown. (b)   Item    Number:    The    number    used    to identify item called out in the illustration. (2)   National    Stock    Number.        Indicates     the national  stock  number  assigned  to  the  item and which will be used for requisitioning. (3)   Part Number.  Indicates the primary number used   by   the   manufacturer,   which   controls the design and characteristics of the item by means of its engineering drawing, specifications,     standards     and     inspection requirements to identify an item or range of items. (4)   Description.      Indicates   the   Federal   item name and, if required, a minimum description to identify the item. (5)   Location.      The   physical   location   of   each item listed is given in this column.  The lists are  designed  to  inventory  all  items  in  one area of the major item before moving on to an adjacent area. (6)   Usable   On   Code.      Usable   on   codes   are included to help you identify which component  items  are  used  on  the  different models.  Items in the enclosed lists are used on all models of the 500 KW 50/60 HZ DOD generator set model MEP 029A. (7)   Quantity    Required    (QTY    Reqd.).        This column    lists    the    quantity    of    each    item required for a complete major item. (8)   Quantity.    This  column  is  left  blank  for  use during   an   inventory.      Under   the   RCV'D column list the quantity you actually receive on your major item.  The date columns are for  your  use  when  you  inventory  the  major item at a later date; such as for shipment to another site. B-1