TM 5-6115-584-34
NAVFAC P-8-623-34
TO-35C2-3-455-2
VIEW A-A
VIEW B-B
NOTE
This switch can be identified by the fact
that there are no extruded threads. The
terminal lugs are die punched. Nuts are
used to hold the terminal wires on.
When installing this switch on 60 HZ sets,
the harness leads will have to be reposi-
tioned to reach some of the switch stacks
that have been moved.
Figure 6-10.1 Switch Assembly, Rotary (P/N 123919LB)
Change 7 6 - 2 0 . 1
