Table 4-2. Troubleshooting (Cont) - TM-5-6115-584-12

Table 4-2. Troubleshooting (Cont) - TM-5-6115-584-12_104

TM-5-6115-584-12 Generator Set Diesel Engine Driven Tactical Skid Mtd. 30 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
59

TM 5-6115-584-12 NAVFAC P-8-622-12 TO-35C2-3-456-1 TM-05682C-12 Table 4-2. Troubleshooting (Cont) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION 3. ENGINE CRANKS NORMALLY BUT FAILS TO START (Cont). Step7. Inspect and test glow plug assemblies (paragraph 4-48). Replace bad glow plugs. 4. ENGINE STARTS BUT DOES NOT RUN SMOOTHLY (MISFIRES, KNOCKS, OR MAKES UNUSUAL NOISES). Step 1. Check steps 1, 2, 3, 4 and 5 under ENGINE CRANKS NORMALLY BUT FAILS TO START above. Perform corrective action as necessary. Step 2. Check valve to rocker arm clearance (paragraph 4-46). Adjust clearance if necessary. 5. LOW ENGINE POWER ESPECIALLY UNDER HEAVY LOAD. Step 1. Check steps 1, 2, 3, 4 and 5 under ENGINE CRANKS NORMALLY BUT FAILS TO START above. Perform corrective actions as necessary. Step 2. Check air cleaner assembly for obstructions (paragraph 4-41). Remove obstructions. 6. ENGINE HAS EXCESSIVE OIL CONSUMPTION. Step 1. Check air cleaner element. Clean or replace element if necessary. Step 2. Check breather pipe (paragraph 4-45). Clean or replace breather pipe. 7. LOW OIL PRESSURE. Step 1. Check oil level (paragraph 4-51). Add oil if required, Step 2. Check oil pressure gauge (paragraph 4-33). Replace a bad gauge. 8. HIGH OIL PRESSURE. Step 1. Check oil. Add proper grade of oil. Step 2. Check oil pressure gauge (paragraph 4-33). Replace gauge if necessary. 4-8

Privacy Statement
Press Release
Contact