TM 5-6115-465-34
TO 35C2-3-446-2
NAVFAC P-8-625-34
TM 06858B/06859D-34
1.
12.
Branched wiring harness
Screw & captive washer assy
13.
Screw & captive washer assy
2.
Backup plate
14.
Load sensing module
3.
Nut
15.
Nut
4.
Screw & captive washer assy
16.
Tooth lockwasher
5.
Branched wiring harness
17.
Mode Selector Switch
6.
Nut
18.
Nut
7.
Screw & captive washer assy
19.
Nut
8.
Protective cap
20.
Screw & captive washer assy
9.
Nut
21.
Screw & captive washer assy
10.
22.
Chassis
Protective cap
11.
ME 5-6115-465-34/8-14
Figure 8-14.
Load Bank Control Box Assembly, Exploded View
8-23.
WIRING HARNESSES.
b. If the wiring harness has sustained damage
and requires repair or rebuild, refer to figures 8-21
a. Refer to the Operator and Organizational
or 8-22 for layout, identification, and material re-
Maintenance Manual for wiring harness removal,
quirements and Appendix A for detailed soldering and
cleaning, inspection, and repair procedure.
replacement procedures.
c. Refer to the Operator and Organizational
Maintenance Manual for wiring harness installation
instructions.
8-26
