T O 35C2-3-442-2
P-8-627-34
TM 5-6115-457-34
TM-07464A-35
Figure 6-23.
DC relay assembly (A5) test setup
6-91. INSPECTION.
a. Inspect electrical components and
Avoid breathing fumes generated by
printed circuit board in accordance with
unsoldering/soldering. Eye pro-
tection is required.
b. Inspect relays in accordance with
a. Exercise care not to apply excessive
c. Inspect relay sockets for damage,
heat to components when soldering connec -
shorts to case and surrounding pins.
tions.
6-92. REPAIR. Repair printed circuit
board in accordance with paragraph 6-54,
b. Press relay (6) into relay socket (10)
step f.
squarely and secure in position with screw
(5).
6-93. REASSEMBLY. Refer to figure
6-24 and reassemble dc relay assembly in
reverse order of index numbers assigned.
c. Test dc relay assembly as outlined
Pay particular attention to the following:
Change 8
6-62
