T.O. 35C2-3-442-2
P-9-TM-457-35
TM-07464A-35 TM 5-6115-457-34
1.
22.
Screw assembly (4)
Wiring harness
2.
23,
Standoff (4)
Screw assembly (4)
24.
3.
Voltage regulator
Self locking nut (4)
25.
4.
Screw assembly (4)
Shoulder washer (8)
26.
5.
Nut assembly (4)
Heatsink assembly
27.
6.
Terminal board (2)
Screw assembly (2)
7.
28.
Nut
Self locking nut (2)
29.
Variable resistor
8.
Terminal lug
9.
30.
Variable resistor
Transistor
10.
31.
Variable resistor
Heatsink
11.
32.
Screw assembly (4)
Bracket
12.
33.
Nut assembly (4)
Screw assembly (2)
34.
13.
Screw assembly (2)
Standoff (2)
14.
35.
Self locking nut (2)
Component board assembly
15.
36.
Terminal lug
Resistor (2)
16.
37.
Shoulder washer (2)
Transistor (2)
17.
38.
Transistor
Resistor
18.
39*
Mica washer
Eyelet (8)
19.
Screw assembly (4)
40.
Component board
20.
41.
Nut assembly (4)
Chassis assembly
21.
Terminal lug
feedback resistor R32 slowly counterclock-
b. Set feedback resistor R32 and rate
wise until voltage is stable.
resistor R31 to mid-point, and start gen-
erator set. If voltage is stable turn feed-
back resistor R32 counterclockwise until
2. If voltage stability is still not
voltage becomes unstable, then turn clock-
achieved, adjust rate resistor R31 slightly
wise until voltage is stable.
counterclockwise from mid-point and
readjust with feedback resistor R32.
1. If voltage is still unstable turn
6-53