TM 5-6115-400-35
Figure 134. Electric governor hydraulic actuator.
throttle position indication is positively
which pressure is higher and will continue
connected to the output shaft so that the
to move until
position indicating circuit gives an output
either the piston reaches the limit of its
exactly proportional to the throttle
travel or the push pull pressures become
position.
equal. The velocity of piston movement
is dependent upon the magnitude of
governor hydraulic actuator.
pressure unbalance.
c. Cleaning, Inspections and Repair.
(4) The linear piston motion is used to drive
(1) Clean the hydraulic actuator filter every 200
the throttle. A connecting link is attached
hours or sooner if found
to the piston which moves the throttle
position indicating transducer.
The
174
