TM
5-6115-376-13
2330-205-20514 has been modified for use with the
(d)
Personnel
Platform. A
retractable
4 6 KW and 60 KW generator sets as follows:
personnel platform is mounted at rear of the
generator trailer frame, and provides access to
(a) Handbrake levers. T h e t w o h a n d b r a k e
c o n t r o l panel of the generator set (fig. 1-2(2)).
l e v e r s have been removed from under the gener-
a t o r trailer frame and mounted on the front step
(e)
Rear
landing
leg
assemblies. T w o
o f the fender assembly (fig. 12(1).
landing
legs are provided, one at each side of the
r e a r channel of the frame (fig. 2-4).
(b) Blackout tail and stoplight. T h e r i g h t
r e a r blanket tail and stoplight assembly has been
(2) C a r g o t r u c k ( P U - 4 0 8 / M , P U - 7 0 0 / M ) .
r e m o v e d and relocated to the right of its original
T h e truck mounted generator sets use the M54A2
l o c a t i o n (fig. 1-2 (2).
5 - T o n 6x6 cargo truck as described in TM 9-2320-
211-10, figures.
(c) Fender knit assembly. The fender kit
assembly
(FSN
6115-705-4001)
is
fitted
to
the
(3) Skid p l a t f o r m ( P U - 4 0 8 / M ) . T h e
skid
platform (MERDC drawing 13214E1435)
is a
generator trailer frame and provides platform
w o r k area for personnel and mounting facility for
light-weight assembly 166 inches long, 84 inches
power control and ancillary components (fig. 12
w i d e and 8 inches high, weighing 2600 pounds. It
(1).
p r o v i d e s mounting facilities for the diesel engine
