• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 3-139. Generator Rotor and Balance Assembly, Exploded View (Sheet 2 of 2)
Figure 3-141. Generator Stator Assembly, Exploded View

TM-9-6115-464-34 Generator Set Diesel Engine Driven Tactical Skid Mtd 15 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
  322    323    324    325    326  327  328    329    330    331    332  
ARMY   TM   9-6115-464-34 AIR  FORCE  TO  35C2-3-445-2 NAVY  NAVFAC  P-8-624-34 Figure 3–140. Lead Block Assembly, Exploded View (30) If inspection reveals damage to the lead block assembly, disassemble as follows: (a) Remove nuts (1, figure 3-140), Iockwashers (2) and screws (3). (b) Separate pressure plates (4) and blocks (5, 6, and 7). (31) If inspection reveals damage to stator assembly, disassemble as follows: (a) (b) (c) Remove screws (1, figure 3–141) and Iockwashers (2) to remove ring (3). (400 Hz generator sets only.) Remove screws (4) and Iockwashers (5) to remove lead bushing (6). Unscrew eye bolt (7) from frame assembly (8). NOTE Do not attempt to disassemble frame assembly. c. Cleaning, Inspection, and Repair. WARNING Use solvent in a well ventilated area. Avoid inhaling solvent fumes. Do not allow solvent to come into contact with the skin. Failure to observe this warning could result in servere personal injury or death. (1) Clean all generator parts using an approved solvent. Do not dip parts into solvent. 3-293







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.