APPENDIX G TORQUE LIMITS - TM-9-6115-668-13

APPENDIX F OPERATORS LUBRICATION INSTRUCTIONS

TM-9-6115-668-13 5Kw 28VDC Auxiliary Power Unit (APU) MEP 952B Manual
Page Navigation
597

TM 9-6115-668-13 APPENDIX G TORQUE LIMITS G.1 BOLTS. Bolt alloy: K18-8(A4)-70, DIN 931/933, in lengths up to 8 x nominal thread diameter (d) at room tem- perature, strength class 70 (normal), work-hardened. NOTE Coefficient of friction µ = 0.16 Coarse-pitch thread M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 Tightening torque, ft-lb (Nm) 3.5 (4.7) 6 (8.2) 14.5 (19.6) 28.8 (39) 49.4 (67) 78.2 (106) 119.5 (162) 166 (225) 233 (3 16) 174 (236) 224 (304) 327 (443) 446 (605) G.2 STUDS. Stud alloy: A1Mg 3 Coarse-pitch thread Tightening torque, ft-lb (Nm) M3 M 4 M 5 0.6 (0.8) 1.5 (2.0) 2.6 (3.5) G-1 (G-2 blank)

Privacy Statement
Press Release
Contact