TM     9-6115-668-13 Table 1-2 Description of Major Components, Generator Set 150 kW Item No. Item Name Short  Description 1 Unit Hood Assembly Protects assemblies from the elements, and muffles the noise produced by the diesel engine and synchronous generator. 2 Diesel Engine Drives the Synchronous Generator Assembly. 3 Base Frame Assembly For installation of Generator Set 150 kW assemblies. 4 Engine Preheating Assembly Preheats the engine oil, fuel injection pump, cylinder heads, and generator belts. 5 Scavenge Pump Assembly Pumps out engine oil, e.g. for oil changes or repair purposes. 6 Silencer Assembly Muffles noise produced by the diesel engine. 7 Battery Set Assembly Provides power for the Engine Preheating Assembly, diesel engine glow plugs, starter, and 24 VDC electrical system. 8 Fuel  Tank  Assembly Capacity is approximately 101.7 gallons (385 liters) of fuel. 9 Ground Strap Grounds the Control Cabinet Assembly to the Unit Hood Assembly. 10 Identification Plate Identifies the Generator Set 150 kW (NSN, P/N and SERIAL NO). 11 Control Cabinet Assembly For activation, deactivation, control, and monitoring of Generator Set 150 kW. 12 Air filter Assembly Filters incoming combustion air. 13 Synchronous Generator Assembly Generates electrical power. 14 Subcurrent Filter Assembly Filters the engine oil. 15 Slave Receptacle Connector Assembly For parallel connection of battery sets (onboard set with an 2 4 V external  battery  set). 16 Lifting Ring For hoisting the Generator Set 150 kW. 17 Eyeboft For securing the Unit Hood Assembly. 1 - 6