TM 9-6115-660-13&P
Table 2-2. Operator Preventive Maintenance Checks and Services - continued
Location
Item
Interval
Procedure
Not Fully Mission
No.
Item to
Capable if:
Check/Service
WARNING
If trailer is not coupled to towing vehicle, ensure that wheels are securely
chocked. Failure to do so may cause trailer to roll, resulting in injury to
personnel or damage to equipment.
NOTE
Both handbrake levers (1) are adjusted the same way. This procedure covers
one handbrake lever.
d
Handbrake Lever Adjustment
(1) Release handbrake lever (1).
(2) Turn adjustment knob (2) clockwise
to tighten or counterclockwise to
loosen. If unable to adjust, or
adjustment has been used up, refer
to Unit Level Maintenance.
(3) Check adjustment (Refer to step b).
Repeat steps (1) and (2) as required.
Repeat step c.
2
Before
LANDING LEG
a
With trailer connected to towing
Landing leg
ASSEMBLY
vehicle, check landing leg assembly (3)
assembly will not
for ease of operation
secure in stored
position or will not
support trailer.
b
Check landing leg assembly (3) for
proper mounting, alignment, and
general condition.
c
Ensure landing leg assembly (3) can be
locked in stored and support positions.
d
Ensure locking lever (4) moves freely.
e
Ensure landing leg foot or wheels (5)
can be adjusted up and down.
2-10 Change 2
