TM 9-6115-660-13&P
APPENDIX F
UNIT AND DIRECT SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
F-1 SCOPE.
This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment required for performance of unit and direct support maintenance
of the AN/MJQ-37 and AJQ-38 Power Plants and PU-798, PU-798& PU-799 and PU-799A Power Units. It authorizes the
requisitioning, issue, and disposition of spares, repair parts and special tools as indicated by the source, maintenance and
recoverability (SMR) codes.
F-2 GENERAL.
In addition to Section I, Introduction, the Repair Parts and Special Tools List is divided into the following sections:
F-2.1 Section II. Repair Parts List. A list of spares and repair par authorized by this RPSTL for use in the performance
of maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists
are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in ascending
figure and item number sequence. Bulk materials are listed by item name FIG BULK at tie end of the section. Repair
parts kits or sets are listed separately in their own functional group within Section II.
F-2.2 Section III Special Tools List. A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE ON CODE
(UOC) column) for the performance of maintenance. (There are no special tools for the Power Plants/Power Units.)
F-2 Section IV. Cross-reference Indexes. A list, in National item identification number (NIIN) sequence, of all National
stock numbered items appearing in the listings, followed by a list in alphanumeric sequence of all part numbers appearing
in the housing. National stock numbers and par numbers are cross-referenced to each illustration figure and item number
appearance. The figure and item number index lists figure and item number in alphanumeric sequence and cross-
references NSN, CAGEC and pat number.
F-3 EXPLANATION OF COLUMNS (SECTlONS II and III).
F-3.1 ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
Change 2 F-1
