Operator Preventive Maintenance Checks and Services - continued

Table 2-2. Operator Preventive Maintenance Checks and Services - TM-9-6115-659-13P_49

Operator Preventive Maintenance Checks and Services - continued - TM-9-6115-659-13P_51

TM-9-6115-659-13P Power Unit PU-732/M (NSN 6115-00-280-3082) MEP-118A 15 Kw 400 Hz Generator Set M200A1 2-Wheel 4-Tire Modified Trailer Manual
Page Navigation
24

TM 9-6115-659-13&P Table 2-2. Operator Preventive Maintenance Checks and Services - continued Location Item Interval Procedure Not Fully Mission No. Item to Capable if: Check/Service WARNING If trailer is not coupled to towing vehicle, ensure that wheels are securely chocked. Failure to do so may cause trailer to roll, resulting in injury to personnel or damage to equipment. NOTE Both handbrake levers (1) are adjusted the same way. This procedure covers one handbrake lever. d. Handbrake Lever Adjustment (1) Release handbrake lever (1). (2) Turn adjustment knob (2) clockwise to tighten or counterclockwise to loosen. If unable to adjust, or adjustment has been used up, refer to Unit Level Maintenance. (3) Check adjustment (Refer to step b). Repeat steps (1) and (2) as required. Repeat step c. 2 Before LANDING LEG a. With trailer connected to towing Landing leg ASSEMBLY vehicle, check landing leg assembly (3) assembly will not for ease of operation. secure in stored position or will not support trailer. b. Check landing leg assembly (3) for proper mounting, alignment, and general condition. c. Ensure landing leg assembly (3) can be locked in stored and support positions. d. Ensure locking lever (4) moves freely. e. Ensure landing leg foot or wheels (5) can be adjusted up and down. Change 2 2-11

Privacy Statement
Press Release
Contact