TM 9-6115-659-13&P
NOTES:
1.
2.
3.
4.
5.
BUNDLE WIRE HARNESS AT EACH BREAKOUT AND AT 3.00 MAX INTERVALS USING TIEDOWN STRAP, FIND
NO.4.
HOT STAMP “97403-13229E5829” lN ACCORDANCE WITH MIL-M-60903 ON SLEEVING FIND NO. 3.
EACH WIRE SHALL BE IDENTIFIED BY HOT STAMPING ADDRESS DESIGNATIONS USING .09-.16 HIGH
BLACK CHARACTERS ON INSALATION SLEEVING, FIND NO.6, IN ACCORDANCE WITH MIL-M-60903.
ATTACH WITHIN TWO INCHES OF BOTH END TERMINATIONS APPROPIATE ADDRESS SHALL CONSIST
OF THE FROM TERMINATION, A DOUBLE HEADED ARROW AND THE TO TERMINATION.
STRIP AND TIN WIRES IN ACCORDANCE WITH MIL-STD-2000, USING SOLDER, FIND NO. 5.
CRIMPED CONNECTIONS SHALL BE IN ACCORDANCE WITH MIL-STD-454, REQUIREMENT 19.
WIRE LIST
Figure G-2. Relay Board Harness Assembly W11 (Sheet 2).
G-4
