TM 9-6115-659-13&P
F-4.2
Part Number Index. Part numbers in this index are listed by part number in ascending alphanumeric sequence
(i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group in order A
through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).
F-4.2.1
CAGEC column. The Commercial and Government Entity Code (CAGEC) is used to identify the manufacturer,
distributor, or Government agency, etc., that supplies the item.
F-4.2.2
PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm, corporation,
or Government activity), which controls the design and characteristics of the item by means of its engineering drawings,
specifications, standards, and inspection requirements to identify an item or range of items.
F-4.2.3
STOCK NUMBER column. This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and CAGEC columns to the left.
F-4.2.4
FIG. column. This column lists the number of the figure where the item is identified/located in Section II and III.
F-4.2.5
ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in
the adjacent figure number column.
F-4.3
Figure and Item Number Index.
F-4.3.1
FIG. Column. The column lists the number of the figure where the item is identified/located in Section II and III.
F-4.3.2
ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced in
the adjacent figure number column.
F-4.3.3
STOCK NUMBER Column. This column lists the NSN for the item.
F-4.3.4
CAGEC Column. The Commercial and Government Entity Code (CAGEC) is used to identify the manufacturer,
distributor, or Government agency, etc., that supplies the item.
F-4.3.5
PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm, corporation,
or Government activity), which controls the design and characteristics of the item by means of its engineering drawings,
specifications, standards, and inspection requirements to identify an item or range of items.
F-5
SPECIAL INFORMATION.
F-5.1
Usable on Code. The usable on code appears in the lower left corner of the Description Column heading.
Usable on codes are shown as "UOC ..." in the Description Column (justified left) on the first line below the last line of the
applicable item description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on
codes used in this manual are:
CODE
USED ON
CODE
USED ON
EVQ
AN/MJQ-35
EVR
PU-797
FMF
AN/MJQ-35A
FMK
PU-797A
ESP
AN/MJQ-36
Change 2 F-6