Fabricated Tools and Equipment (Continued)

Table 2-2. Fabricated Tools and Equipment

Fabricated Tools and Equipment (Continued) - TM-9-6115-604-34_63

TM-9-6115-604-34 Generator Set Diesel Engine Driven Tactical Skid Mtd 5 Kw. 1 Phase-2 Wire 1 Phase -3 Wire 3 Phase -4 Wire 120. 120/240 and 120/208 Volts Manual
Page Navigation
43

TM 9-6115-604-34 NAVFAC P-8-633-34 Table 2-2. Fabricated Tools and Equipment (Continued) DESCRIPTION Guide Studs, rear gear housing installation (2 required) Fabricate from capscrew, part number 106069, or equivalent Guide Studs, vibration damper installation (2 required) Fabricate from capscrew, part number 3023539, or equivalent Guide Studs, oil pan installation (10 required) Fabricate from capscrew, 7/16", 14 thread, approximately 3" long Guide Studs, thermostat housing support (2 required) Fabricate from support capscrew, part number 205669, or equivalent Guide Studs, aftercooler cover installation (2 required) Fabricate from capscrew, part number 3012475, or equivalent Guide Studs, intake manifold installation (6 required) Fabricate from capscrew, part number S149, or equivalent. 2-9

Privacy Statement
Press Release
Contact