ARMY TM 9-6115-604-12
NAVY NAVFAC P-8-633-12
d.
Install.
(1) Install replacement sender using sealing compound MIL-S- 45180, Type II, or equivalent.
(2) Connect wire to sender as tagged.
4-67. MAINTENANCE OF LUBE OIL FILTER ASSEMBLY AND LUBE OIL BY-PASS ASSEMBLY. The filter and by-
pass filter assembly allows oil to be filtered In the event that main oil filters become clogged or restricted. Check
filter by-pass for proper operation by placing hand on filter; if they are warm, oil by-pass is working.
a.
Remove By-pass Filter (see Figure 4-47.
(1)
Using a suitable container, drain the oil pan.
(2)
Using a suitable container to catch any excess oil, remove supply and return lines from elbows (3 and 4).
(3)
Remove by-pass filter assembly by removing hexagon head capscrews (1) and lockwashers (2).
(4)
Remove elbows (3 and 4) and plug (5) from oil filter head (8).
Figure 4-7. By-Pass Filter Assembly
(5)
Unscrew element (9) from oil filter head (8). Remove filter head adapter (6), and lockplate (7).
b. Install By-Pass Filter.
Dry cleaning solvent P-D-680, Type 11, is flammable and moderately toxic to the skin, eyes, and
respiratory tract. Skin, eye, and respiratory tract protection is required to avoid injury to
personnel.
(1)
Clean the oil filter head (8), lockplate (7), and filter head adapter (6) with dry cleaning solvent P-D-680, Type
II, or equivalent.
4-132
