ARMY TM 9-6115-604-12
NAVY NAVFAC P-8-633-12
1.
RIGHT HAND FAN SHROUD
25 HOSE ASSEMBLY
2.
LEFT HAND FAN SHROUD
26 HOSE CLAMP
3.
HEXAGON HEAD CAPSCREW
27 PIPE BUSHING
4.
HEXAGONAL NUT
28 ELBOW
5.
LOCKWASHER
29. STRAIGHT ADAPTER
6.
TOP AND BOTTOM GRILL
30. HOSE CLAMP
7.
CENTER GRILL
31 RADIATOR OUTLET HOSE
8
OVERFLOW HOSE
32. WATER OUTLET TUBE
9.
HOSE CLAMP
33 RADIATOR INLET HOSE
10. HOSE ASSEMBLY
34. WATER INLET TUBE
11. HOSE CLAMP
35. HEXAGON HEAD CAPSCREW
12. MARKER BAND
36 HEXAGON NUT
14. PIPE ADAPTER
37. FLAT WASHER
15. HEXAGON HEAD CAPSCREW
38. LOCKWASHER
16. HEXAGONAL NUT
39 HEXAGON HEAD CAPSCREW
17 LOCKWASHER
40 HEXAGONAL NUT
18. HOSE CLAMP
41 LOCKWASHER
19. RADIATOR DRAIN HOSE
42. RADIATOR
20. HOSE CLAMP
43 RIGHT HAND RADIATOR SUPPORT
21 STRAIGHT ADAPTER
44 LEFT HAND RADIATOR SUPPORT
22 SHUT OFF COCK
45 SIGHT GLASS ASSEMBLY
23. PIPE NIPPLE
46 RADIATOR CAP
24 ELBOW
47 CLAMP
Figure 3-17. Radiator Assembly and Related Parts (Sheet 2 of 2)
c.
Maintenance of Radiator Cap
The radiator gets very hot during operation. Do not remove cap until radiator has
reached a point at which there is no built-up steam pressure.
(1) Inspect. Inspect the radiator cap (46, Figure 3-17) for rust or signs of leakage. Remove cap and check for
worn tabs.
(2) Replace. Replace defective radiator cap.
d.
Maintenance of Water Filter Assemblies. See Figure 3-3.
(1) Inspect. Inspect the water filters for secure mounting or signs of leakage.
(2) Service. Service by replacing the elements. See Table 3-1 and Figure 3-3.
(a) Close the valves on the water filter heads.
(b) Unscrew the water filter elements and discard.
(c) Apply a light coat of lubricating oil, MIL-L-9000, to the gasket sealing surfaces prior to installing the water
filter element.
3-48
