13228E1911
NOTES:
TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
1.
2.
3.
4.
5.
6.
CONNECTOR PLUG SHALL BE STAMPED, AS INDICATED IN ACCORDANCE WITH
MIL-STD-130.
ALL SOLDERED CONNECTIONS
REQUIREMENT 5.
WIRE MARKING SHALL BE IN
LENGTH BETWEEN GROUPS OF
SHALL BE IN ACCORDANCE WITH MIL-STD-454,
ACCORDANCE WITH MIL-W-5088 EXCEPT THAT
NUMBERS SHALL NOT EXCEED 6 INCHES.
MARK “97403-13228E911” ONTO STRAP, FIND NO. 6 IN ACCORDANCE
WITH MIL-STD-130.
BUNDLE ALL WIRES IN THE SAME RUN AT THREE INCH INTERVALS USING
STRAPS, FIND NO. 5.
ALL DIMENSIONS ARE SHOWN IN INCHES.
Figure G-2.
Fabrication of Special Relay Assembly to Remote
Functions Box Assembly Wiring Harness (Sheet 2 of 2)
G-5
