TM5-6115-634-14&P
NAVFAC P-8-647-14&P
TO-35C2-3-445-14
TM-6115-14&P/1
b.
Trailer.
The trailer is a modi-
fied M200A1, 2 1/2 ton, 2-wheel trailer.
Towing Facilities
Lunette
Towing Vehicle
5-ton 6x6
Brakes
Air over
hydraulic
Handbrakes
Mechanical,
handlever
controlled
Tires
Pneumatic,
normal use 35
psi (3.16 kg/sq
cm). In mud,
snow and sand
use 15 psi
(1.06 kg/sq
cm).
24 VDC
Voltage (lighting)
c. PU 794/G
Figure 1-3 shows the
data plates identifying the
PU 794/G.
Length
181 inches (459.74 cm)
Width
97 inches (246.34 cm)
Height
98 inches (248.92 cm)
Weight
6440 lbs (2921.18 kg)
Operating Range
-1O°F to 110°F (-24°C to 43°C) at
sea level
-lO°F to 95°F (-24°C to 35°C) up to
3000 feet (914.4 M)
Maximum 150 (26 percent) slope from
the level in any direction
Section III.
PRINCIPLES OF OPERATION
1-11.
Principles of Operation
trailer can be towed over prepared roads
at a maximum speed of 55 mph (88.5 km/h),
The PU 794/G provides 20 kW, 60 HZ pre-
and over unimproved roads at a maximum
cise power. It is noise suppressed and
speed of 30 mph (48.3 km/h). It will
EMP protected.
It is designed to be
ford hard-bottom water crossings to any
operated and paralleled remotely from a
depth that can be negotiated by the towing
distance up to 100 feet (30.48 M). The
vehicle.
Section IV.
SERVICE UPON RECEIPT
1-12. Unpacking/Uncrating the PU 794/G
g.
Lift the generator and remove the
plywood shipping base from the trailer.
a.
Remove the packing list from the
right front side of the crate and set
h.
Set the generator back on the
aside.
trailer and reinstall the mounting
bolts.
b.
Using metal cutters, cut the band
from around the crate.
i.
Remove the packing material from
the battery box, cable tray, accessory
c.
Remove the crate from the top of
box ,
the generator set.
d.
Cut the barrier paper along the
from
base of generator set.
k.
j.
and the document box compartment.
Remove the bands and plywood cap
the cable reels.
Use the packing list and inventory
e.
Remove the barrier paper and des-
the accessories.
Report any discrepan-
sicant bags.
cies to your supervisor.
f.
Remove the mounting bolts that
1.
Remove all packing/cushioning
mount the generator to the trailer.
material from the cables and tools.
1-7
