TM5-6115-634-14&P NAVFAC  P-8-647-14&P T0-35C2-3-445-14 TM-6115-14&P/1 Recoverability  Application/Explanation Codes F H O L A able, condemn and dispose of the item at unit or aviation unit level. Reparable  item.  When uneconomically  repar- able, condemn and dispose of the item at the direct support or aviation  intermediate level. Reparable  item.  When uneconomically  repar- able, condemn and dispose of the item at the general support level. Reparable  item.  When beyond lower level repair  capability, return to depot. Con- demnation and disposal of item not authorized below depot level. Reparable  item.  Con- demnation and disposal not  authorized  below specialized  repair activity (SRA). Item requires special handling or condemna- tion  procedures  because of specific reasons (e. g., precious metal content, high dollar value, critical mate- rial, or hazardous material).  Refer  to appropriate  manuals/ directives  for  specific instructions. c.  FSCM  Column  3 Supply Code for Manufacturer (FSCM) is a 5-digit numeric code which is used to identify  the  manufacturer,  distributor, or Government agency, etc., that supplies the  item. d. PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer (individual,  company,  firm,  corporation, or  Government  activity),  which  controls the design and characteristics of the item by means of its engineering drawings, specifications  standards,  and  inspection requirements to identify an item or range of items. NOTE : When you use a NSN to requisi- tion an item, the item you receive may have a different part number from the part  ordered. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following information: (1) The Federal item name and, when required,   a minimum description to identify the item. (2) Items that are included in kits and sets are listed below the name of the kit or set. (3) Spare/repair parts that make up an assembled item are listed immedi- ately  following  assembled  item  line entry. (4) Part numbers for bulk materials  are  referenced  in  this  column in the line item entry for the item to be  manufactured/fabricated. (5) When the item is not used with all serial numbers of the same model,  the  effective  serial  numbers  are shown on the last line(s) of the descrip- tion (before UOC). (6) The usable on code, when applicable (see paragraph 5, Special information). (7) In the Special Tools List section,  the  basis  of,  issue  (BOI) appears as the last line(s) in the entry for each special tool, special TMDE, and other special support equipment. When density  of  equipments  supported  exceedes density spread indicated in the basis of issue, the total authorization is increased  proportionately. F-5