Solenoid Valve L3

CHAPTER 9 MAINTENANCE OF FUEL TRANSFER PUMP ASSEMBLY

Figure 9-1. Fuel Transfer Pump Installation, Exploded View

TM-5-6115-593-34 Generator Set Diesel Engine Driven Tactical Skid Mtd. 600 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
117

TM5-6115-593-34 NAVFAC P-8-631-34 TO-35C2-3-463-2 g. Solenoid Valve L3. (1) Test. Test solenoid valve 3 (19, figure 9-1) using an ohmmeter set on the Rx1scale. Check for continuity. If continuity is not indicated the valve is defective and should be replaced. (2) Replacement. (See figure 9-1.) Disconnect electrical connector from solenoid valve. Disconnect hose assemblies from elbows (8). Remove screws (18) and remove solenoid valve (19). 9-2

Privacy Statement
Press Release
Contact