TM 5-6115-593-12
TO 35C2-3-463-1
NOTE: Contacts to be arranged per wiring diagrams.
Time Delay Relay
Manufacturer ...................Agastat Division
of Amerace
Corp.
Part number.....................7012AH
Voltage ............................120V AC, 50/60 Hz
Type ................................Time delay on
energize
adjustable, 3 to
30 min.
Contacts ..........................DPDT
Time Delay Relay
Manufacturer ..................Agastat Division
of Amerace
Corp.
Part number ....................70220K
Voltage ...........................24V DC
Type ................................Time delay on de-
energize, adjust-
able, 5 min.
Contacts .........................DPDT
Time Delay Relay
Manufacturer ...................Westinghouse
Electric Corp.
Part number.....................ARPT-20
Type ................................Mechanical
Contacts .........................1-NO, 1-NC
p.
Fuel System Diagram. See figure 1-8 for
the generator set fuel system diagram.
q.
Instruction Plate Information. The generator
set has instruction plates located throughout the set.
See Figure 1-9 for the location of the plates. The
document compartment contains lamination of all
instruction plates. On unhoused sets, several of the
plates can be found only in the document compartment.
r.
Schematics and Wiring Diagrams. FO-1
through FO-16 are the schematic and wiring diagrams
for the generator set major components and auxiliary
equipment.
1-11. TORQUE DATA. Torque data applicable to
operator/crew and organizational maintenance is given
in Table 1-1.
1-12. DIFFERENCE BETWEEN MODELS. Differences
between generator sets are delineated in the Repair
Parts and Tools List, TM5-6115-593-24P, Intermediate
(Field) (Direct and General Support) and Depot Level
Maintenance TM5-6115-593-34, and in this manual.
NOTE
Throughout this technical manual MEP-
029A is referred to as code A and MEP-
029B is referred to as Code B.
1-19
