TM 5-6115-593-12 TO 35C2-3-463-1 DC Voltmeter DOD Drawing Number ..... 76-11234 Scale  .............................. 0 to 30V DC Accuracy .........................  ± 2 percent Frequency Meter DOD Drawing Number ..... 69-595 Scale  .............................. 48 to 53 Hz and 57 to 62 Hz; 250 degree scale calibrated in Hz from 48 to 62 Hz, scale divisions of 0.1 Hertz Input  ............................... 120 volts, 1 phase 50/60 Hz (matched with frequency transducer 69-578) Fuel Level Gauge DOD Drawing Numbe....... 69-575 Input  ............................... 24V DC Type  ............................... Fuel, empty to full, calibrated 1/4, 1/2, 3/4 Sender resistance. ........... Empty - 0 ohms, 1/2 full - 15 ohms, full - 30 ohms Kilowatt Meter DOD Drawing Number ..... 70-4012 Scale  .............................. Percent power, blue mark at 83 percent, red mark at 100 per- cent; full scale 0 to 133 percent Accuracy ......................... 2 percent full scale Kilovar Meter DOD Drawing Number ..... 76-11215 Type  ............................... Percent kilovar Scale  .............................. Blue mark at 83 percent, red mark at 100 percent, full scale 0 to 133 percent Lube Oil Temperature Gauge DOD Drawing Number ..... 76-11228, used with 76-11249 sender and 76-11230 resis- tor for 24V DC operation. 200°F (93°C) - 548 ohms 300°F (149°C) - 108 ohms Scale  .............................. 150 to 350°F (100 to 150°C) Lube Oil Pressure Gauge DOD Drawing Number ..... 76-11227, used with 76-11255 sender and 76-11230 resistor for 24V DC operation. 0 psi - 240 ohms 80 psi - 60.3 ohms Scale  .............................. 0 to 100 psig Oil Pressure Gauge DOD Drawing Number..76-11104 Pressure range ......10 to 150 psi (0.7 Jo 10.5 kg/cm²) Mechanism ............................ C" shape bourbon tube Power Factor Meter DOD Drawing Number ..... 76-11216 Power  ............................. 120V AC 10 per- cent, 50/60 Hz Sensing Input  ................. 0.25 to 5.0 amps from current transformer Accuracy  ........................ 1 percent full scale Scale  .............................. 7 inch, 250 degree deflection Time Totalizing Meter DOD Drawing Number ..... 73-0507 Type  ............................... Indicates total hours of running time Scale  .............................. 0 to 9999 Voltage Meter DOD Drawing Number. .... .69-599 Type ................. .............. 250 degree, 0 to 500 volt scale, each scale, division: 5 volts Accuracy  ........................ 2-1/2 percent of full scale (integral rectifiers) tor for 24 V DC operation. 1-12