TM 5-6115-585-12NAVFAC P-8-623-12TO 35C2-3-455-1TM-05682C/05685B-12Section II.ACOUSTIC SUPPRESSION KIT5-2.ACOUSTICSUPPRESSIONKIT.The acoustic suppression kit (ASK) is an add-on enclosure thatreduces the noise level from the DOD Standard Generator Set, 10KWDiesel Engine Driven, Models MEP-003A and MEP-112A.The controlcubicle and ac output control box assembly are not covered andthe fuel tank is only partially covered.Other controls or areasrequiring frequent service can be reached through top panel andright and left panel access doors.All ASK plates are shown infigure 5-1.5-3.COVERASSEMBLY.a.Removal.See figure 5-2.Remove cover assemblyconsisting of top panel, left and right panels, front panel andside closure assemblies as follows:(1)Remove four screws (1) and washers (2) securingleft panel assembly (3) to left support assembly (4).(2)Remove two screws (5) and locknuts (6), and fourwashers (7 and 8), securing side closure assembly (9) to rearclosure assembly(10).(3)Remove six screws (11) and washers (12) securingright panel assembly (13) to right support assembly (14).(4)Remove two screws (15) and washers (16) securingright panel assembly (13) to rear panel assembly (17), and removetwo screws (18) and locknuts (19), and four washers (20 and 21)securing right panel assembly (13) to rear closure assembly (10).(5) Remove three screws (22) and locknuts (23), andsix washers (24 and 25) securing top panel assembly (26) to rearclosure assembly (10).WARNINGThe ASK Cover assembly is heavy.Four people arerequired to lift cover.Failure to follow safetyrules could result in personal injury.(6)Lift and remove cover assembly from generator set.5-2Change 8
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
